Description
J Series Grade 2 – Flat Lever
- ANSI : Meets & Exceeds ANSI – A156.2, Series 4000, Grade 2 Standards
- UL Listings : UL Listed for “A” Label 3 Hour Fire Doors
- ADA Compliance : Meets ADA and ANSI A117.1 accessibility codes
- Lock Chassis : Steel, Zinc dichromated for Corrosion Resistance
- Trim : 5″ Solid zinc diecast levers, 3 3/8″ wrought brass roses
- Lever Return: Anti-sag mechanism with independent lever return springs to prevent lever sag
- Handing : Non-Handed-Completely reversible
- Backset & Latchface : 2 3/4” backset std. with 1 1/8“ x 2 1/4” latchface
- Cylinder : 6 Pin Brass, C Kwy, with 2 Keys
- Strikes : 4 7/8″ x 1 1/4″ ASA
- Door Preparation : ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
- Optional Thru Bolts : Removable Thru Bolts – Can be installed without thru bolts
- Door Thickness : Factory Set for 1 3/4″ – can be adjusted to fit 1 3/8″ up to 2″ thick
- Standard Lever Design : Flat
- Other Lever Choices: Curved, Half Curved, S-A & S-B
- Standard Finish : US26D & US10B
- Fasteners : Combination screws for wood or metal doors & frames
- Warranty : Limited Lifetime Warranty
Passage
- Both levers always unlocked.
Privacy
- Push-button locking.
- Unlocked from outside with a small screwdriver.
- Turn inside lever or close door to release button.
- Inside lever always free for immediate egress.
Entry
- Push-button locking.
- Push-button locks outside lever until it is unlocked with key or by turning inside lever.
- Inside lever always free for immediate egress.